Job description template
Welder Job Description
Welder job description: duties, processes (MIG, TIG, stick, flux-cored), codes such as AWS D1.1, certification and safety requirements. Copy and edit.

The role in brief
A welder joins, repairs and cuts metal parts with hand-held or remotely controlled equipment, working from blueprints and a welding procedure specification (WPS). A useful welder job description names the processes (stick/SMAW, MIG/GMAW, flux-cored/FCAW, TIG/GTAW), the metals and thicknesses, the welding positions, and the code the work is inspected to, such as AWS D1.1 for structural steel, ASME Section IX for pressure equipment or API 1104 for pipelines. Those details decide which welders can do the job, so put them in the posting.
- Read blueprints, weld symbols and the WPS to determine the joint, process, filler metal and weld sequence
- Set up and operate welding equipment for the processes the job uses, adjusting amperage, voltage, wire feed, shielding gas flow and travel speed
- Prepare and fit up parts: cut, grind and bevel edges, clean off scale, rust, grease and moisture, then align, clamp and tack parts in jigs and fixtures
- Weld components in flat, horizontal, vertical and overhead positions to the dimensions and tolerances on the drawing
Paste the description into Cohesyve to find, contact and test Welder candidates on the real work. 14-day free trial for 10 candidates, not charged until it ends.
Applying for a role like this? Practise the assessment free →Responsibilities
- Read blueprints, weld symbols and the WPS to determine the joint, process, filler metal and weld sequence
- Set up and operate welding equipment for the processes the job uses, adjusting amperage, voltage, wire feed, shielding gas flow and travel speed
- Prepare and fit up parts: cut, grind and bevel edges, clean off scale, rust, grease and moisture, then align, clamp and tack parts in jigs and fixtures
- Weld components in flat, horizontal, vertical and overhead positions to the dimensions and tolerances on the drawing
- Inspect finished welds visually and with gauges for defects such as porosity, undercut, cracking and lack of fusion, and repair any that fail
- Control heat input, and apply preheat, interpass temperature limits and post-weld heat treatment where the procedure requires, to prevent distortion and cracking
- Follow hot-work safety: wear the required PPE, use ventilation and fume extraction, and work with a fire watch and a hot-work permit where required
- Maintain welding machines, torches, cables and gas cylinders, and report faulty equipment or defective material
- Mark parts with job numbers and piece marks, and record weld details for traceability
Required skills
Hiring a Welder? Start from this description
Paste the description above into Cohesyve. It finds Welder candidates, reaches out to them and tests each one on an AI job simulation of the real work, then returns a ranked shortlist. 14-day free trial for 10 candidates, not charged until it ends.
Nice to have
Qualifications
- 1High school diploma or equivalent; courses in blueprint reading, shop maths and mechanical drawing help
- 2Welding training from a vocational school, community college, apprenticeship or the armed forces, or equivalent on-the-job experience
- 3Passes a practical weld test to the company's WPS before starting production work
- 4Electrical safety training, which OSHA requires for welders
- 5A state or local welding licence where the work location requires one
- 6In India: an ITI Welder trade certificate (the one-year Craftsmen Training Scheme course that leads to the National Trade Certificate) or a National Apprenticeship Certificate
Work environment
Work environment
Career growth
Welders progress to lead welder, welder fitter or fabricator, then welding supervisor or foreman. Many move into inspection through the American Welding Society's Certified Welding Inspector (CWI) credential. Others become welding instructors, specialise in pipe or high-alloy work, or study welding engineering. In India, the DGT's Craft Instructor Training Scheme leads to teaching at ITIs.
Common questions
What are a welder's roles and responsibilities?
A welder reads blueprints and the WPS, prepares and fits up metal, welds it in the required positions, inspects the result and repairs defects, and keeps equipment and the work area safe. Fabrication and maintenance welders also cut, grind and repair parts.
Which welding processes should a welding job description list?
List only the processes the job uses. Stick (SMAW) is common for outdoor and repair work, MIG (GMAW) and flux-cored (FCAW) suit production and structural work, and TIG (GTAW) is used for precise welds on thin material, stainless steel and aluminium. Naming the process and the position filters out applicants who cannot do the work.
What certification should a welder have?
It depends on the code your work is inspected to. The American Welding Society's Certified Welder programme has no prerequisite courses: welders take a practical test at an AWS Accredited Test Facility and the weld is inspected against the applicable standard. Many employers also qualify welders to their own WPS under AWS D1.1, ASME Section IX or API 1104. Certification lapses without continuity records, so ask for proof of recent welding in the process.
What is a WPS?
A welding procedure specification is the written instruction for making a particular weld: the process, base and filler metals, joint design, position, preheat and electrical settings. Welders are qualified by welding a test piece to it, which is then examined visually and by bend or other tests.
What is the difference between a welder and a welder fitter?
A welder makes the welds. A welder fitter also reads the drawings, lays out, cuts and fits the parts together and tacks them in place before welding. If the job includes fit-up from drawings, use the welder fitter title.
How do you test a welder before hiring?
Give a practical weld test on the process, position and material thickness the job uses, following your WPS, then have the test piece inspected visually and bend-tested or examined to your code. A short check of blueprint and weld-symbol reading before the booth test saves time on candidates who cannot read the drawings.
Put this Welder job description to work
Cohesyve takes the description, finds Welder candidates, reaches out to them and runs an AI job simulation of the work, then returns a ranked shortlist.
1,500+
assessments completed
50%
faster time-to-hire
5 min
from JD to assessment
14-day free trial · 10 candidates · Not charged until the trial ends
From the blog