best resume font

Best Resume Fonts, Font Size and Margins for 2026

·5 min read
Best Resume Fonts, Font Size and Margins for 2026

The short answer

The best resume font is a clean, widely installed one such as Calibri, Arial, Helvetica, Aptos, Garamond, Georgia or Cambria. Use 10.5 to 12 point for body text and 14 to 18 point for your name, with margins of about 1.27 to 2.54 cm (0.5 to 1 inch) and one font throughout.

  • Sans-serif fonts (Calibri, Arial, Aptos) look modern; serif fonts (Garamond, Georgia, Cambria) look traditional. Both are fine.
  • Body text: 10.5 to 12 pt. Section headings: 12 to 14 pt. Your name: 14 to 18 pt.
  • Margins: 2.54 cm (1 inch) is standard; go down to about 1.27 cm (0.5 inch) only if you need the room.
  • Avoid script, novelty and very thin fonts, and save as PDF so the font travels with the file when the employer accepts it.
For job seekers

Cohesyve, which publishes this guide, lets job seekers practise on simulations of real work and share a skills profile with employers. Try it free for 3 days.

The best resume font is one that's easy to read on a screen and on paper, installed on most computers, and plain enough that nobody notices it. Calibri, Arial, Helvetica, Aptos, Garamond, Georgia and Cambria all do the job. Font choice won't win you an interview on its own, but a cramped or unusual font can make a strong resume harder to read.

This guide covers the best fonts for a resume or CV, what font size to use, margins and spacing, and fonts to avoid. The advice applies whether you call it a resume or a CV.

What is the best font for a resume?

Pick a clean, common font and use it throughout. These are safe choices:

FontStyleFeelGood for
CalibriSans-serifModern, compactMost roles; fits a lot on a page
ArialSans-serifNeutral, very commonAny role; safe on every computer
HelveticaSans-serifClean, slightly widerDesign-aware or corporate roles (common on Mac)
AptosSans-serifModern, openMost roles, if you use Microsoft 365
VerdanaSans-serifWide, very legibleScreen reading; use a slightly smaller size
GaramondSerifClassic, elegantLaw, academia, publishing, finance
GeorgiaSerifWarm, readable on screenTraditional roles that will be read on screen
CambriaSerifSturdy, formalFormal and traditional sectors
Times New RomanSerifFamiliar, denseFine, though it can look dated

Serif or sans-serif? Serif fonts have small strokes at the ends of letters (Garamond, Georgia). Sans-serif fonts don't (Arial, Calibri). Sans-serif tends to look modern and reads well on screens; serif tends to look traditional. Neither is "right". Choose one that suits your field and looks tidy at your chosen size.

If you're unsure, use Calibri or Arial at 11 point. You won't go wrong.

What font size should a resume be?

Use 10.5 to 12 point for body text. Fonts differ in how big they look at the same point size, so check the printed page rather than trusting the number.

ElementRecommended size
Your name14 to 18 pt
Section headings12 to 14 pt, bold
Job titles and employersSame as body text, bold or italic
Body text and bullet points10.5 to 12 pt
Contact details10 to 11 pt

A few practical notes:

  • Garamond looks small, so it often needs 11.5 or 12 point.
  • Verdana looks large, so 10 or 10.5 point is often enough.
  • Don't shrink below about 10 point to squeeze onto one page. Cut words instead.
For job seekers

Your font gets you read. Your skills get you hired.

Practise on job simulations of the real work in your target role, see where you lost marks, and share a skills profile with employers. 3-day free trial, cancel anytime.

What margins should a resume have?

Use margins of 2.54 cm (1 inch) on all sides as a starting point. If you need more space, you can reduce them to around 1.27 cm (0.5 inch), but keep left and right margins equal.

SettingRecommendation
Standard margins2.54 cm (1 inch) all round
Minimum marginsAbout 1.27 cm (0.5 inch)
Line spacing1.0 to 1.15 within sections
Space between sections6 to 12 pt extra, or one blank line
AlignmentLeft-aligned body text (avoid full justification, which leaves uneven gaps)

White space helps a reader find your job titles and dates quickly. A page filled edge to edge looks harder work to read, even if it holds more.

Which fonts should you avoid on a resume?

Avoid fonts that are hard to read, look unprofessional or may not display on the reader's computer.

  • Script and handwriting fonts such as Brush Script or Lucida Handwriting: hard to read.
  • Novelty fonts such as Comic Sans, Papyrus or Impact: they draw attention for the wrong reasons.
  • Very thin or light weights: they fade on screen and on cheap printers.
  • Fonts you downloaded that most people won't have: if you send a Word file, the reader's computer may swap in a different font and break your layout.
  • Mixing many fonts: one font, or two at most (one for headings, one for body).

Does the font affect applicant tracking systems?

Standard fonts cause no problems. What matters more for parsing is the layout: tables, text boxes, columns, images and text in headers and footers are what tend to cause trouble. Our guide to an ATS-friendly resume explains what one ATS vendor says breaks its parser and how to test your file.

Should you save your resume as a PDF or a Word document?

Save as a PDF unless the employer asks for Word. A PDF keeps your font and layout the same on every screen. Some application systems prefer .docx, so follow any instruction in the job advert and keep both versions ready.

Name the file clearly, for example "Firstname-Lastname-Resume.pdf".

What does a well-formatted work resume look like?

A clean work resume uses one font, consistent sizes and plenty of white space. Here's a format you can copy (an example, not a rule):

PartFormat
NameCalibri 16 pt, bold, top left or centred
Contact lineCalibri 10.5 pt, one line: city, phone, email, LinkedIn
Section headingsCalibri 12 pt, bold, small caps or all caps, a thin rule underneath
Job title, employer, datesCalibri 11 pt; title in bold; dates aligned right with a tab stop
Bullet pointsCalibri 11 pt, 1.0 line spacing, 3 to 6 bullets per role
Margins2 cm all round

For what to write in each section, see our guides to a resume summary and a student resume, and for skills to highlight, employability skills.

Quick formatting checklist

  • One readable font, 10.5 to 12 pt body text
  • Name 14 to 18 pt; headings slightly larger than body
  • Margins between about 1.27 and 2.54 cm, equal left and right
  • Line spacing 1.0 to 1.15, with space between sections
  • Left-aligned text, consistent date format, consistent bold and italics
  • No tables, text boxes or images if you're applying through an online system
  • Saved as PDF (or .docx if asked), with a clear file name
  • Printed or viewed at 100% to check it reads easily

A tidy resume gets you read. What gets you hired is showing you can do the job. Cohesyve lets job seekers practise AI job simulations of real tasks in their target role and get a scored report, which helps you go into interviews with examples ready.

Frequently asked questions

What is the most professional font for a resume?

Calibri, Arial, Garamond, Georgia and Cambria all read as professional. Choose the one that suits your field: sans-serif for modern or technical roles, serif for traditional sectors such as law.

Is 10 point font too small for a resume?

It's at the lower limit. Some fonts are readable at 10 point, but most resumes look better at 10.5 to 12. If you need 10 point to fit everything, cut content instead.

Is Times New Roman OK for a resume?

Yes, it's readable and widely installed. Some readers find it dated, so a modern alternative such as Georgia or Cambria can look fresher.

What font size should my name be on a resume?

14 to 18 point usually works. It should stand out without taking up a large part of the page.

Are the best CV fonts different from the best resume fonts?

No. The same fonts, sizes and margins work for both. A UK or European CV may run to two pages, but the formatting rules don't change.

Should I use colour on my resume?

A single, dark accent colour for headings is fine. Keep body text black or very dark grey so it prints and reads clearly.

For job seekers

Your font gets you read. Your skills get you hired.

Practise on job simulations of the real work in your target role, see where you lost marks, and share a skills profile with employers. 3-day free trial, cancel anytime.

3 days

free trial

Unlimited

tests on Pro

Full

report on every test

Any

real job posting

3-day free trial · Then Pro $20/mo · Cancel anytime

For hiring teams

Hiring rather than job hunting? Cohesyve finds and contacts candidates from your job description, tests them on a simulation of the real work and ranks them.

Look past resume fonts to real skills →

Practise before it counts

3-day free trial

Start practising